Posted: Tue 2:16 pm Post subject: Driver for LSI MegaRAID SAS 8208ELP (rev08) Gentoo Forums Forum Index Kernel & Hardware If you would like to install ServerView RAID Manager, you can install it so that you can manage the virtual drive with the GUI or the amCLI command.Gentoo Forums :: View topic - Driver for LSI MegaRAID SAS 8208ELP (rev08) ĭriver for LSI MegaRAID SAS 8208ELP (rev08)
Type: Direct-Access ANSI SCSI revision: 05 You can see the MegaSR device under /proc/scsi/scsi. Go back to the installer screen by ++, and reboot the server. If you craete a driver deb package for megasr, you don't have to do this step as the installer automatically installs it to the target device. # echo "blacklist ahci" > /etc/modprobe.d/nf # cp megasr.ko /target/lib/modules/4.4.0-87-generic/updates
# mkdir /target/lib/modules/4.4.0-87-generic/updates Copy the megasr module to the target virtual disk, and recreate the initramfs image. When the installer says it's completed, press ++ to the shell before rebooting the server.
Rebuild the initramfs image before reboot. When you get to the partitioning step, you will see a MegaSR device. Go back to the installer screen by pressing ++, and continue the installation. You need to create a proper driver image to do this though (create the OEMDRV label for the vfat partition, and place the udeb package to like /driver-injection-disk/Ubuntu-drivers/xenial). If you create a udeb packaage for megasr, you don't have to do this as the installer can automatically load it from the driver image. # cp megasr.ko /lib/modules/4.4.0-87-generic/updates # mkdir /lib/modules/4.4.0-87-generic/updates Install the megasr module to the installer, and load it to the kernel so that the installer can see the virtual drive as a MegaSR device instead of dmraid or mdadm. Press ++ to bring up a shell, and copy the megasr.ko file to the installer. Open a terminal and copy the megasr.ko module to the installer. Before starting the installer, add "modprobe.blacklist=ahci" to the kernel option line so that the installer does not load the ahci driver. You can mount an ISO image to iRMC AVR console if you have advanced license installed. Boot the serer from Ubuntu Installation media.
0 kommentar(er)
